Bark - LED-lights and what they mean



Yellow LED
Green LEDRed LED
Turning the device on



Green light for 3 sec + the device vibrates 
= the device is turning on.

If the Green light goes out in 3 sec 
= the device's battery is empty.

Yellow + Green + then a 2,4 sec pause
searches for network and satellites.

If the device is on and in charger and repeats a cycle of:
= yellow and then red for 2.4 seconds = battery is charging - no network/satellites.
= yellow and then green for 2.4 seconds =  battery is fully charged - no network/satellites.
While the device is in use

Green flashing with 1 sec intervals 
= satellites and network are OK

Turning the device off
Red + device vibrates 
the device is turning off.
Charging the deviceGreen lit for 1 sec + a short pause
= the device is on while in charger and the battery is fully charged.
Red + Green flashing every 1 sec  = the device is on while in charger and the battery is charging.
Continuously lit Green
= the device is not on while in charger - the battery is fully charged.
Continuously lit Red
= the device is not on while in charger - the battery is charging.


Note!

The battery must be charged at least every three months. Long storage without charging can damage the battery.


If the Blue LED light is lit continuously or flashes, please contact technical support